Now, I never went as far as changing the ports my SSH servers listened on. This always seemed kind of pointless. I'm sure there's plenty of script kiddies whose cracking-scripts don't look for services running on alternate ports, but I've never found much value relying on "security by obscurity".
At any rate, I figured this was enough to keep me basically safe. And, to date, it seems to have. That said, I do periodically get annoyed at seeing my system logs filled with the "Too many authentication failures for root" and "POSSIBLE BREAK-IN ATTEMPT" messages. However, most of the solutions to such problems seemed to be log-scrapers that then blacklisted the attack sources. As I've indicated in prior posts, I'm lazy. Going through the effort of setting up log-scrapers and tying them to blacklisting scripts was more effort than I felt necessary to address something that seemed, primarily to be only a nuisance. So, I never bothered.
I've also been a longtime user of tools like PortSentry (and its equivalents). So, I usually picked up attacks before they got terribly far. Unfortunately, as Linux has become more popular, there seems to be a lot more service-specific attacks and less broad-spectrum attacks (attacks preceded by probing of all possible entry points). Net result: I'm seeing more of the nuisance alerts in my logs.
Still, there's that laziness thing. Fortunately, I'd recently sat through a RedHat training class. And, while I was absolutely floored when the instructor told me that even RHEL 6 still ships with PermitRootLogin set to "yes", he let me know that recent RHEL patch levels included iptables modules that made things like fail2ban somewhat redundant. Unfortunately, he didn't go into any further detail. So, I had to go and dig around for how to do it.
Note: previously, I'd never really bothered with using iptables. I mean, for services that don't require Internet-at-large access, I'd always used things like TCPWrappers or configuring to only listen on loopback or domain sockets to prevent exposing the services. Thus, with my systems, the only Internet-reachable ports were the ones that had to be. There never really seemed to be a point in enabling a local firewall when the system wasn't acting as a gateway to other systems. However, the possibility of leveraging iptables in a useful way kind of changed all that.
Point of honesty, here: the other reason I'd never bothered with iptables was that its syntax was a tad arcane. While I'd once bothered to learn the syntax for ipfilter - a firewall solution with similarly arcane syntax - so that I could use a Solaris-based system as a firewall for my house, converting my ipfilter knowledge to iptables didn't seem worth the effort.
So, I decided to dig into it. I read through manual pages. I looked at websites. I dug through my Linux boxes netfilter directories to see if I could find the relevant iptables modules and see if they were internally documented. Initially, I thought the iptables module my instructor had been referring to was the ipt_limit module. Reading up on it, the ipt_limit module looked kind of nifty. So, I started playing around with it. As I played with it (and dug around online), I found there was an even better iptables module, ipt_recent. I now assume the better module was the one he was referring to. At any rate, dinking with both, I eventually set about getting things to a state I liked.
First thing I did, when setting up iptables was decided to be a nazi about my default security stance. That was accommodated with one simple rule: `iptables -P INPUT DROP`. If you start up iptables with no rules, you get the equivalent default INPUT filter rule of `iptables -P INPUT ACCEPT`. I'd seen some documentation where people like to set there's to `iptables -P INPUT REJECT`. I like "DROP" better than "REJECT" - probably because it suits the more dickish side of me. I mean, if someone's going to chew up my systems resources by probing me or attempting to break in, why should I do them the favor of telling their TCP stack to end the connection immediately? Screw that: let their TCP stack send out SYNs and be ignored. Depending on whether they've cranked down their TCP stack, those unanswered SYNs will mean that they will end up with a bunch of connection attempts stuck in a wait sequence. Polite TCP/IP behavior says that, when you send out a SYN, you wait for an ACK for some predetermined period before you consider the attempt to be failed and execute your TCP/IP abort and cleanup sequence. That can be several tens of seconds to a few hours. During that interval, the attack source has resources tied up. If I sent a REJECT, they could go into immediate cleanup, meaning they can more quickly move onto their next attack with all their system resources freed up.
The down side of setting your default policy to either REJECT or DROP is that it applies to all your interfaces. So, not only will your public-facing network connectivity cease, so will your loopback traffic. Depending on how tightly you want to secure your system, you could bother to iterate all of the loopback exceptions. Most people will probably find it sufficient to simply set up the rule `iptables -A INPUT -i lo0 -j ACCEPT`. Just bear in mind that more wiley attackers can spoof things to make it appear to come through loopback and take advantage of that blanket exception to your DROP or REJECT rules (though, this can be mitigated by setting up rules to block loopback traffic that appears on your "real" intefaces - something like `-A INPUT -i eth0 -d 127.0.0.0/8 -j DROP` will do it).
The next thing you'll want to bear in mind with the defualt REJECT or DROP is that, without further fine-tuning, it will apply to each and every packet hitting that filterset. Some TCP/IP connections start on one port, but then get moved off to or involve other ports. If that happens, your connection's not gonna quite work right. One way to work around that, is to use a state table to manage established connections or related connections. Use a rule like `iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT` to accommodate that.
At this point you're ready to start punching the service-specific holes in your default-deny firewall. On a hobbyist or vanity type system, you might be running things like DNS, HTTP(S), SMTP, and IMAP. That will look like:
| -A INPUT -p udp -m udp --dport 53 -j ACCEPT | # DNS via UDP (typically used for individual DNS lookups) | |
| -A INPUT -p tcp -m tcp --dport 53 -j ACCEPT | # DNS via TCP (typically used for large zone transfers) | |
| -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT | # HTTP | |
| -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT | # HTTP over SSL | |
| -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT | # SMTP | |
| -A INPUT -p tcp -m tcp --dport 587 -j ACCEPT | # SMTP submission via STARTTLS | |
| -A INPUT -p tcp -m tcp --dport 993 -j ACCEPT | # IMAPv4 + SSL |
What the ipt_limits module gets you is the ability to rate-limit connection attempts to a service. This can be a simple as ensuring that only "so many connections" per second are allowed access to the service, limiting the number of connections per time interval per source or outright blacklisting a source that too frequently connects.
Doing the first can be done within the SSH and/or TCP Wrappers (or, for services run through xinetd, through your xinetd config). Downside of this is, since it's not distinguishing sources, if you're being attacked, you won't be able to get in since the overall number of connections will have been exceeded. Generally, potentially allowing others to lock you out of your own system is considered to be "not a Good Thing™ to do". But, if you want to risk it, add a rule that looks something like `-A INPUT -m limit --limit 3/minute -m tcp -p tcp --dport 22 -j ACCEPT` to your iptables configuration and be on about your way (using the ipt_limit module).
If you want to be a bit more targeted in your approach, the ipt_recent module can be leveraged. I used a complex of rules like the following:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -m recent --set --name sshtrack --rsource -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --update --seconds 60 --hitcount 3 --name sshtrack --rsource -j LOG --log-prefix "ssh rejection: " -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --update --seconds 60 --hitcount 3 --name sshtrack --rsource -j DROP -A INPUT -p tcp -m tcp --dport 22 -j ACCEPTWhat the above four rules do is:
- For each new connection attempt to port 22, add the remote source address to the "sshtrack" tracking table
- If this is the third such new connection within 60 seconds, update the remote source address entry in the tracking table and log rejection action
- If this is the third such new connection within 60 seconds, update the remote source address entry in the tracking table and DROP the connection
- Otherwise, accept the new connection.
As a bit of reference: on RHEL-based systems, you can check what iptables modules are available by listing out '/usr/include/linux/netfilter_ipv4/ipt_*'. You can then (for most) use `iptables -m [MODULE] --help` to show you the options for a given module. For example:
# iptables -m recent --help | sed -n '/^recent v.*options:/,$p'
recent v1.3.5 options:
[!] --set Add source address to list, always matches.
[!] --rcheck Match if source address in list.
[!] --update Match if source address in list, also update last-seen time.
[!] --remove Match if source address in list, also removes that address from list.
--seconds seconds For check and update commands above.
Specifies that the match will only occur if source address last seen within
the last 'seconds' seconds.
--hitcount hits For check and update commands above.
Specifies that the match will only occur if source address seen hits times.
May be used in conjunction with the seconds option.
--rttl For check and update commands above.
Specifies that the match will only occur if the source address and the TTL
match between this packet and the one which was set.
Useful if you have problems with people spoofing their source address in order
to DoS you via this module.
--name name Name of the recent list to be used. DEFAULT used if none given.
--rsource Match/Save the source address of each packet in the recent list table (default).
--rdest Match/Save the destination address of each packet in the recent list table.
ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/
Gives you the options for the "recent" iptables module and a URL for further infomation lookup.
No comments:
Post a Comment